Odoo quality control runs on three records in the Quality app. Control points decide when an inspection is needed. Quality checks are the inspections themselves, done on a receipt, a manufacturing order or a shop floor tablet. Quality alerts record a defect and what was done about it.
Odoo quality control runs on three records in the Quality app. Control points decide when an inspection is needed. Quality checks are the inspections themselves, done on a receipt, a manufacturing order or a shop floor tablet. Quality alerts record a defect and what was done about it. The Quality app is part of Odoo Enterprise.
Most factories already inspect. The problem is that the results live on paper, in a register near the machine, or in someone's head. When a customer complains about a batch, nobody can say who checked it, what was measured or whether the same supplier lot went into other orders. Moving inspections into Odoo ties each result to the product, the lot, the operation and the person. This guide shows how to set that up for a manufacturing business, and it is part of our wider guide to Odoo ERP for manufacturing.
The three building blocks of the Odoo Quality module
| Record | What it does | Where to find it |
|---|---|---|
| Control point | A rule: inspect this product (or category) at this operation, this often, using this type of check | Quality, then Quality Control, then Control Points |
| Quality check | One inspection created by a control point (or by hand), with a pass or fail result | Quality Checks button on receipts, deliveries and manufacturing orders, and in Shop Floor |
| Quality alert | A logged problem with a root cause, corrective actions and preventive actions | Quality, then Quality Control, then Quality Alerts |
You set up control points once. Odoo then creates the checks automatically as receipts, manufacturing orders and deliveries come through. Alerts are raised when something goes wrong.
Inspection stages in a manufacturing flow
Most factories need checks at three stages. Odoo can attach a control point to each of them, because a control point is linked to an operation type.
| Stage | Odoo operation | Typical checks |
|---|---|---|
| Incoming inspection | Receipts | Dimensions or weight of raw material, supplier test certificate attached, visual condition |
| In-process inspection | Manufacturing, at a specific work order operation | First-piece measurement after machine setup, torque values, a photo of a weld or joint |
| Final inspection | Manufacturing (on completion) or Delivery | Functional test, packing and label check, customer-specific checklist |
Start with the stage that causes the most rework today. For many small manufacturers that is incoming material: a bad lot of raw material found at final inspection has already absorbed machine time and labour.
Setting up a control point
A control point is a short form. The fields that matter most are what it applies to, when it fires, how often, and what the operator has to do.
- Products and Product Categories: which items the rule covers. Use categories when the same check applies to a whole family, such as all steel bar stock.
- Operations: receipts, manufacturing, delivery and so on. When you choose a manufacturing operation, a Work Order Operation field appears so you can attach the check to one step, such as welding.
- Control per and Control Frequency: explained below.
- Type: the kind of check the operator performs.
- Team and Responsible: who owns the result.
- Instructions and Message If Failure: what the operator should do, and what to do when the check fails.
Control per: how much one check covers
- Operation: one check for the whole receipt or manufacturing order.
- Product: one check for each different product in the operation.
- Quantity: a check on a percentage of the items, which you set as a partial test. 100% means every unit.
Control frequency: how often checks are created
- All: every time the conditions are met.
- Randomly: on a percentage of operations, which is how you set up sampling.
- Periodically: once per period of days, weeks or months, for example one first-piece check per day.
- On-Demand: only when someone requests it.
Check types and when to use each
| Type | Use it for |
|---|---|
| Instructions | A step the operator must read and confirm, such as a safety or setup note |
| Pass - Fail | Visual or go/no-go gauge checks |
| Measure | A numeric reading against a norm and tolerance, such as a diameter or a weight |
| Take a Picture | Evidence of a weld, a finish or packing, attached to the record |
| Worksheet | A multi-question checklist, such as a customer's final inspection form |
| Spreadsheet | Several readings in a table, such as five dimensions on one part |
| Register Consumed Materials | Recording which component lot was used, for traceability |
| Register Production | Recording the quantity produced at a step |
| Print label | Printing a label at a defined point in the process |
Register Consumed Materials is worth a second look if you sell to automotive or pharma customers. Linking the component lot to the finished lot is what lets you answer "which orders used this batch?" in minutes. Our post on serial numbers vs lot numbers in Odoo explains which one to use.
Running quality checks on the shop floor
Operators do not need to open the Quality app. Receipts, deliveries and manufacturing orders that have pending checks show a Quality Checks button, which opens the list of checks for that order. Pass - Fail checks get Pass and Fail buttons. Other types, such as Measure, are completed with Validate, and a Measure check cannot be completed without a value.
On the production floor, the Shop Floor screen shows each work order as a series of steps on a tablet. Quality checks appear as steps in that sequence, so they are part of the job rather than a separate form, and the result is stamped with the operator and the time.
Handling failed checks with quality alerts
A failed check shows the operator your Message If Failure, so write that text as an instruction: "Move the lot to the QC hold rack and call the shift supervisor." Then the problem needs a record of its own. That is the quality alert.
Alerts can be created from the Quality Alert button on a manufacturing order or receipt, from the menu on a Shop Floor work order card, or directly in the Quality app. Each alert holds:
- the product, work centre, transfer and team involved
- a priority of one to three stars
- a Root Cause
- a Corrective Actions tab for the fix, and a Preventive Actions tab for stopping it happening again
Alerts move through stages on a Kanban board, so the quality team can see what is open. If you follow ISO 9001 or a customer's supplier quality manual, this is your nonconformance and corrective action record, kept in one place instead of in a folder.
One practical tip: create a separate QC hold or quarantine location in your warehouse and move rejected quantities there. Stock in that location cannot be picked for a delivery by mistake while the alert is being resolved.
Example inspection plan for a small machining unit
Here is a starting plan for a small CNC machining business making turned parts for a few industrial customers. It is an illustration, not a template to copy as-is.
| Control point | Operation | Control per / frequency | Type |
|---|---|---|---|
| Bar stock diameter | Receipts, category "Raw material: bar" | Quantity 10% / All | Measure, with norm and tolerance from the drawing |
| Mill test certificate attached | Receipts, same category | Operation / All | Take a Picture |
| First-piece inspection | Manufacturing, CNC turning step | Operation / Periodically, once per day | Spreadsheet with the critical dimensions |
| Thread go/no-go | Manufacturing, CNC turning step | Quantity 5% / All | Pass - Fail |
| Final dispatch check | Delivery | Operation / All | Worksheet: quantity, packing, labels, documents |
Five control points is enough to begin. Run them for a month, look at which ones actually catch problems, and adjust the sampling from there.
Odoo quality control on Community edition
The Quality app is not part of Odoo Community. Community users have three routes: a third-party quality app from the Odoo Apps store, a custom module built for your inspection process, or keeping inspections outside Odoo and recording only the outcome, such as moving rejected stock to a hold location. If quality records matter to your customers, compare the cost of an Enterprise subscription with the cost of building and maintaining a custom module before you decide.
Common quality setup mistakes
- Too many checks on "All". Operators who see thirty checks a shift start clicking Pass without looking. Sample where the risk is low.
- Measure checks without a tolerance. A reading with no limits is a number, not a check.
- Vague failure messages. "Contact QC" helps nobody at 2 a.m. on the night shift. Say what to do with the material.
- No lot tracking. Without lots, a failed check cannot be traced back to the supplier batch or forward to customer orders.
- Alerts that never close. Review open alerts weekly. An alert without a preventive action will come back.
Frequently asked questions
Is the Odoo Quality app available in Community edition?
No. Quality is an Odoo Enterprise app. Community users can install a third-party quality app from the Odoo Apps store or have a custom module built. Check that any third-party app supports your Odoo version and links checks to lots and work orders.
What is the difference between a quality check and a quality alert?
A quality check is a single inspection with a result, created by a control point or by hand. A quality alert records a problem that needs action, with a root cause and corrective and preventive actions. A failed check often leads to an alert, but not every alert starts from a check.
How do I set up random sampling in Odoo quality control?
Set the control point's Control Frequency to Randomly and enter the percentage of operations to inspect. To inspect only part of the quantity in each operation, set Control per to Quantity and enter the percentage of items. The two settings can be combined.
Can operators do quality checks on a tablet?
Yes. In Odoo's Shop Floor screen, quality checks appear as steps in the work order, and operators pass, fail or record values on a tablet. Each result is stored with the operator's name and the time, which replaces the paper register at the machine.
Can Odoo quality checks be done on incoming goods?
Yes. Attach a control point to the Receipts operation, either for specific products or for a product category. When a receipt for those products arrives, the checks appear under the Quality Checks button on that receipt before it is validated.
Can I record measurements in Odoo quality checks?
Yes. Use the Measure type for a single reading against a norm and tolerance, or the Spreadsheet type when you need several readings on the same part. The values are saved on the check, so you can review them later by product, lot or date.
If you are starting from paper, set up incoming inspection for your most problematic material first, train one shift, and add in-process checks once the team trusts the system.
Sources: Odoo's documentation on quality control points, quality checks and quality alerts (odoo.com/documentation, version 19.0), checked on 2 November 2026. Field names and options can change between Odoo versions, so confirm them in your own database.
Get a free 30-minute review with an Odiware Odoo consultant. Bring your current inspection points and we will sketch the control points for them.